Configurable SD R/W Datalogger Shield

sd_shield_top_smallI always seemed to get a clash between the device select signal (SS) on my SD/microSD card reader and some other Arduino hardware I was trying to run with it. To get around this I decided to make a dedicated SD card shield with a jumper selectable SS signal.

SS signal clashes are now a thing of the past!

Continue reading “Configurable SD R/W Datalogger Shield”

Arduino As ISP Programming Shield

isp_shield_topOne of the nice aspects of Arduino compatible hardware is the ease of program downloads. This is, in part, due to the bootloader that is programmed into the controller. How does that bootloader get on the hardware in the first place?

One answer is that a second Arduino can be used to load the bootloader (or any other stand-alone code) into the ‘virgin’ target hardware. The Arduino IDE includes an example program called ArduinoISP used for this, but it helps to have some supporting hardware. I built a shield with a few connections that speeds up the process of programming controllers.

Continue reading “Arduino As ISP Programming Shield”